This meter can directly measure the carbon concentration in the atmosphere gas that is used for heat treatment (carburizing, thermal refining, etc.) of steel. This highly advanced measuring equipment is both accurate and easy to operate.
This analyzer measures and records concentrations of CO2, CH4, and NH3 gases in the furnace atmosphere, which enables the furnace atmosphere to be precisely controlled. The analyzer can record measurements obtained at multiple points and control the furnace atmosphere.
This washer has a two-tank structure consisting of an alkali and hot water tank. Workpieces contaminated with cutting oil/coolant and quenching oil are immersed in the alkali tank and are alkali sprayed. Then, the workpieces are sprayed with hot water (as rinse) in the hot water tank, and then air blown to remove droplets. After that, the workpieces are dried in a drying furnace using a sheath heater.
Continuous treatment from degreasing to sintering significantly increases the yield ratio. Degreasing time is considerably shortened by high vacuum dividing. This vacuum degreasing and sintering furnace uses a special gas inflow system and dedicated retort boxes to increasing degreasing capacity.
Aluminum solution heat treatment is a combination of solution , quenching, and aging treatments. This treatment precipitates and hardens aluminum alloy and provides it with superior mechanical properties.
We have uniquely developed this plasma nitriding furnace with a built-in heater. It has many characteristics that are superior to those of conventional ion nitriding furnaces. Since it is possible to control the temperature zone, uniform temperature distribution is obtained. This enables uniform bulk treatment and consolidated treatment of any products to be carried out.